|
 |
|
ULTRA Series Slide 
The Ultra Series Slide is available in 8 bore sizes ranging from 5/16 to1-1/16 imperial and 8mm – 25mm ISO/VDMA.
The Ultra Series slide offers more... |
|
 |
|
GEOSLIDE Series Slide
The GeoSlide guide units utilizes Numatics GeoMetric ISO 6431 VDMA cylinders. The FHG & FHK series offers high load carrying capabilities in a more... |
|
 |
 |
LCX Series Slide
The LCX Series linear slide combines cost-effectiveness with proven dependability. An economical alternative with greater load carrying more... |
|
 |
|
PST Series Slide Table
'PST' - Precision Slide Series. The PST slide provides smooth precise linear motion with high accuracy at twice the thrust of a single bore cylinder. The precision linear rail system more... |
|
 |
|
PS Series Slide
Compact lightweight unit with replaceable air cylinder. Floating piston rod coupling eliminates cylinder binding. Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance. Aluminum body and end blocks more... |
|
 |
|
PBS Series Power Block Slide
The PBS series is designed for applications where space is at a minimum. It has an internally built-in air cylinder in the carriage assembly, reducing overall length. The carriage assembly is supported by four recirculating linear ball more... |
|
 |
|
SH Series Slide
The "SH" series guided linear motion device capable of heavy loads and moderately long strokes. Body: Hardcoat Anodized Aluminum (6061-T6511) Air Cylinder: Stainless Steel Body & Rod (corrosion resistant), more...
|
|
 |
|
LC Series Light Duty Slide
Light Duty Slide - The "LC" series provides guided linear motion at a lower cost. External cylinder is mounted rigidly to the cross body which drives the tool plate. The tool plate motion is guided by two hardened linear more...
|
|
 |
|
B Series Compact Slide
The "B" series design is compact and self-contained. Cylinder pistons are attached directly to each guide rod, conserving size without sacrificing output force. Guide rods are supported by more... |
|
 |
|
SPS Series Small Power Slide
The SPS series small size makes it the ideal slide for getting into those tight spaces. more...
|
|
 |
|
CGT Series Compact Guide Slide
The CGT series Compact Guide Slide is ideal where high load and force are required and minimum space is available. The piston and rod assembly being machined directly into the extruded body achieves space savings. more...
|
|
 |
|
CGS Series Compact Guide Slide
The CGS series Compact Guide Slide is even more compact than the CGT-Series. This series is ideal where high load and force are required and minimum space is available. The piston and rod assembly machined directly into the more...
|
|
 |
|
GS Series Gantry Slide
The GS series Gantry Slide is designed to handle heavier loads and travel greater distances. The design centers around a moving carriage between two fixed tool bars. The carriage is supported and guided by four bearings and more... |
|
 |
|
RG Series Rodless Gantry Slide
The RG series design centers around two separate systems. The gantry, a guided and supported bearing system, to support the load and the rodless cylinder to drive the gantry carriage. more... |
|
